Car Wash V1.4

Car Wash V1.4

Car Wash – FS25
A complete car wash for your vehicles and machines: just drive in, press start, done.

Features:
Conveyor belt with guide rail that pulls the vehicle through automatically
Foam arch, roof and side brushes (they adapt to the shape of the vehicle), rinse and fan drying
Roller gate that opens and closes automatically
Card terminal with start/stop and a display showing how long the wash takes
If the program is restarted, the vehicle is pulled back to the start automatically and washed again
Vehicles actually get clean (dirt is removed while washing)

Technical data:
Purchase price: 120,000
Upkeep: 120 per day
Building size: width 5.4 m inside, height approx. 6.9 m
Space needed (concrete slab with ramps): 8 m wide x 62 m long
Maximum vehicle size: width 4.66 m (incl. mirrors and header), height 5.35 m above the belt, length 22 m (combinations included)
Multiplayer: tested on a server, but not yet with several players at once
PC/Mac only (no console)

Version 1.3.2.0
Bugs and suggestions are welcome in the comments.
Note: Redistributing the mod, or removing or reusing its assets without permission, is not allowed.
This mod is only available on KingMods. If it shows up anywhere else, it is no longer the original.

V1.4.0.0
NEW
– AutoDrive support: AD vehicles stop at the AD destination on the lane, get washed and continue on their own (also to the parking spot if set in AD).
– New key “AD: Drive to car wash” (default: Ctrl + W). The vehicle drives to the AD destination at the car wash automatically. The name of the destination does not matter. The key can be changed in the controls settings.
– Combinations up to 30 m long can now be washed (was 22 m). The building is unchanged, long combinations stick out at the front and back.
– Map icon (category “Other”). Clicking it teleports you to the terminal.
– Flexible spiral cables on the wash brushes (top and side) and on the dryer. They move with the lifting and lowering.
– New junction boxes on the side brushes, turned toward the tower, with a cable from the tower to the box.

IMPROVED
– Dryer: silver rails with the new shape from the wash portals, more modern junction boxes and conduits to the fans.
– Cable mounts at the top of the portals and the dryer redesigned.
– Foam arch: pipes held by clamps like on the water arch, new brackets, supports without gaps, protruding parts removed.
– Lift drive motors removed, they no longer had a function.

FIXED
– Dryer towers and posts had no collision. They are solid now.
– Flickering on the side brush carriages.

RECOMMENDATION FOR AUTODRIVE
Place the AD destination (the holding point) exactly at the entrance at the roller door, a little further inside the car wash, but not in front of the roller door. The vehicle stops there and the wash starts reliably.