Attach Implements Manually V1.0.1






Attach Implements Manually V1.0.1
This mod allows you to manually attach implements to your tractor.
In the general settings, you can choose whether attachments should be connected automatically or manually. If you opt for manual attachment, a message will appear when approaching an implement: “Exit vehicle to attach.”
Once you’ve exited the vehicle and walked to the hitch, you can attach the implement by pressing Q.
After that, you can manually connect the hydraulic hoses, air lines, and electric cables by pressing Y.
The PTO shaft can be connected separately using the Z key.
An exception applies to trailers and implements with a drawbar hitch and Semitrailer attacher:
These will automatically attach as soon as you align the drawbar precisely with the implement’s hitch.
Additionally, when purchasing front loaders, you can choose between different coupler types:
Manual: The front loader implement must be attached manually, as well as the hydraulic hoses.
Auto Locking: The front loader will automatically lock when approaching (if enabled in settings) or by pressing Q from the cab, but the hydraulic hoses must be connected manually.
Quick Coupler: The front loader will automatically lock when approaching (if enabled in settings) or by pressing Q from the cab, and the hydraulic hoses are also connected automatically.
If manual attachment is enabled in the settings, you’ll need to manually connect the hoses after the implement is hitched.
If it is disabled, all connections will be made automatically once the implement is attached.
The following default keys are set for coupling hoses and the top link individually (all rebindable in the settings):
Top link (attach / detach): O
Handbrake (apply / release): Alt + H
Wheel chocks (place / remove): K
Hydraulic in (attach / detach): H
Hydraulic out (attach / detach): lShift + H
Electrics (attach / detach): E
ISOBUS (attach / detach): I
Air brake red (attach / detach): L
Air brake yellow (attach / detach): lShift + L
Tool hose / ToolConnectorHose (attach / detach): T
Custom hose (attach / detach): lShift + C
Coupling implements, hoses and top links through clickable IC points requires the InteractiveControl mod by VertexDezign.
When buying a trailer you can now pick one of three brake types:
No brake: the trailer has no parking brake at all.
Handbrake: applied and released right at the trailer with Alt + H.
Spring brake: with manual brake operation enabled, apply it before disconnecting the red air line. It may then be released with Alt + H using the remaining reservoir pressure and applies automatically below 5 bar. With manual operation disabled, it applies automatically before the red line is disconnected.
The air brake works realistically: the yellow line controls the service brake, the red line releases the spring brake and fills the reservoir.
Whether an uncoupled trailer without a set brake can roll away on a slope is decided by a savegame-wide / server-wide setting. Operating the handbrake by hand can be turned on or off per player in the general settings.
On trailers that carry them, wheel chocks can be placed and removed with K, independently of the handbrake. A trailer with chocks in place will not roll away; to drive off, the chocks have to be removed and the handbrake released.
All key bindings can be customized freely in the settings. The default key for the “Attach” action uses the standard game assignment.
The SDK folder within the mod contains a guide on how to adapt mod vehicles for the mod. This is not strictly necessary but offers extended functions for coupling configurations and trigger adjustments.
V1.0.1.0
Fixed the PTO coupling state on multiplayer savegames.
Minor code cleanup and tweaks.
Coupling can now also be done through InteractiveControl. This requires the InteractiveControl mod by VertexDezign.
Added individual coupling for hoses.
Added individual coupling for the top link.
Added a preview for coupling ToolConnectorHoses.
Added a realistic brake system. The shop now lets you choose between No brake, Handbrake and Spring brake. The handbrake is operated directly at the implement. The spring brake can be released at the implement as long as there is still enough pressure in the tank.
The air brake now behaves realistically: the yellow line controls the brake, while the red line releases the spring brake.
Added a savegame-wide/server-wide setting that determines whether trailers without a set brake can roll away.
Added wheel chocks: on suitably equipped trailers, they can be placed and removed with the K key. A trailer with chocks in place will not roll away.
Attached implements retain their height after attachment; the lowered state is now synchronized in multiplayer.
Required mods:
No More Auto Lift
Author: BayernGamers

