Kverneland TS-Drill V1.0.0.3

Kverneland TS-Drill V1.0.0.3

Technical data:
Working width: 6.0 m
40 coulters at 15 cm row spacing
Hopper capacity: 1350 l
Required power: 160 hp
3-part hydraulic folding for transport
Tine drill

Features:
Spring tine coulters with forward-raked wear points and soil effects
Covering harrow sections that pivot at their mounts and follow the ground
Hydraulic hopper lid with visible seed fill level
Rear stairs with a folding lower step that drops down when the lid opens
Ridge markers on both wings
Seed inlet for a front tank (e.g. Kuhn TF 1512, Horsch Partner 1600 FT)
Rear work camera
Working rear lights, brake lights and indicators
Wear and dirt where the machine touches the soil
Digital display

Compatible with the DF2 front hopper to increase seed capacity.

V1.0.0.3
Now a direct drill: sows straight into stubble and unworked ground
Side chains hook onto lugs on the hopper and wings instead of floating
Centre depth wheels resized so they no longer clip the frame; less suspension travel on all wheels
Fold rams mounted on brackets at both ends, with new hydraulic hoses routed clear of the frame
Removed hydraulic lines that ended in mid-air; fan hoses now connect to the fan motor
Coupler holder moved beside the top link; parked couplers sit in their sockets
Control box mounted flat on the hopper, with its cables running into the tower
Number plate holder bolted to the light board post
Stair handrails now stand on the stair stringers; extra rail up to the hopper removed
Inside of the hopper now uses the correct paint